Skip Navigation Links   ToolTip : 


AISC Steel Connection Design
Civilbay steel conection design is one of the most comprenhensive steel connection design software based on AISC code, CSA S16-14 code (coming soon), and all AISC steel design guides.
Have a free trial of new module, AISC Steel Connection Design,  Start Program   and  User Manual   and  Tutorials in YouTube

CivilBay Concrete Anchorage Design Go to   Concrete Anchorage Design
CivilBay anchor bolt design software is a complete anchorage design software for structural engineers to satisfy the design provisions of ACI 318-14, ACI 318-11, ACI 318M-14, ACI 318M-11 and CSA A23.3-14 code.
  1. It can design both anchor bolt and anchor stud as per ACI 318-14, ACI 318-11, ACI 318M-14, ACI 318M-11 and CSA A23.3-14 code, in US imperial or metric unit
  2. User can design anchor bolt or anchor stud with using or not using anchor reinforcement option
  3. It fully incorporates the seismic design methodologies as per above design codes
  4. User has the options of design anchor bolt or anchor stud as single anchor, pre-defined pattern of group anchors, or any custom layout of group anchors
  5. It can design base plate and anchor bolt at the same time using one input
  6. It can design vertical vessel circular pattern anchor bolt sitting on octagon or circular concrete pedestal as per methodologies stated in ASCE Anchorage Design for Petrochemical Facilities-2013 and PIP STE03350 Vertical Vessel Foundation Design Guide-2008
  7. It can design shear key or shear lug as per ACI 349-06 using US AISC and Canadian CISC code
  8. User can design the anchor forces in 2 direction simultaneously and apply axial and moment forces in X and Y directions at the same time
  9. It provides a fully-interactive 3D graphic user interface and the design result is visually represented in real-time.

CivilBay Crane Runway Beam / Monorail Beam Design Go to   Crane Runway Beam / Monorail Beam Design
This spreadsheet is for designing overhead bridge crane top running crane beam , underhung crane beam and monorail beam based on the following design codes
  • AISC 360-16 LRFD 2010 and ASD 2016 code
  • AISC 360-10 LRFD 2010 and ASD 2010 code
  • AISC ASD 1989 code
  • CSA S16-14 code
  1. The spreadsheet is capable to design up to 2 cranes running in the same aisle at the same time.
  2. For crane runway beam section, the user has option of
    • AISC / CISC W or S section, CISC WWF section
    • AISC / CISC W or S section combined with cap plate
    • AISC / CISC W or S section combined with cap channel
    • Any custom W or W and C combined section
    The custom section option gives user great flexibility to select the crane runway beam section and optimize the design.
  3. The spreadsheet also outputs the crane loads imposed on building column for user to relay to other structural analysis software for building structural analysis
  4. The spreadsheet can design both top running and underhung overhead bridge crane runway beam